< img src="https://top-fwz1.mail.ru/counter?id=3781342;js=na" style="position:absolute;left:-9999px;" alt="Top.Mail.Ru" />

Aluminium Windows and Doors for
Commercial Buildings

Engineered from your façade drawings, with approval shop drawings, test reports for every system,
and phased container loads matched to the site programme.

Office building at glazing stage
The building at glazing stage. Fixed glazing and top-hung vents to every floor of the main elevation.
The lower block of the project
The lower block. Same system carried across
two buildings so the site only holds one set of spares.
Curved structural glazing of the entrance canopy
The entrance canopy. Curved structural glazing set
out from the steel, surveyed on site before fabrication.
Office floor after handover
An office floor after handover. Vents sized so each bay
can be opened without blocking a workstation.
Corridor at fit-out stage
A corridor at fit-out. Protective film stays on until
the floor is finished.
Typical floor before partitioning
Typical floor before partitioning. Full-height fixed glazing
with a top-hung vent to each bay.
Technician checking vent hardware
Final check on the vent hardware before handover,
with our technician on site.

Five performance standards

Every system is tested to five criteria. These are the figures for the systems we use on commercial projects,
and the standard each one is measured to.

  1. Sound insulation

    1

  2. Thermal transmittance

    2

  3. Water tightness

    3

  4. Air tightness

    4

  5. Wind load resistance

    5
Architects reviewing façade drawings

We start from your drawings

Send the façade drawings or a window schedule. Within 24 hours you get a quotation and a marked-up set showing which system goes in which opening. Approval shop drawings follow, and nothing is cut until you have signed them off.

Upload your drawings +
Project team reviewing a quotation on screen

Priced by system and by floor

Quotations are broken down by system and by floor, so you can see where the money is and change a specification without re-pricing the whole job. Production is scheduled against your site programme, not against our factory queue.

Ask for a project quotation +
Finished units packed in crates before shipping

Four inspections before it ships

Incoming aluminium and glass, in-process during fabrication, finished units before packing, and the container itself at loading. The inspection record goes to you before the vessel sails.

See how we build it +
Crates being loaded into a container

Documents travel with the container

Test reports, the Declaration of Performance, CAD sections and a unit-by-unit packing list ship with every load. Large projects go out in phases matched to the floors you are glazing, so you are not storing six months of windows on a live site.

Download the technical pack +
Send your project brief

EMD uses the information you provide to respond to your enquiry about our products and services.
You can unsubscribe at any time. For more, see our Privacy Policy.

Drawings and pricing within 24 hours. Custom sizes are standard, not an extra.

We reply within 24 hours · WhatsApp 7 days a week · No commitment required

Scroll to Top